ABB 1SVP426455R0000 DI524 digital input module
1SVP426455R0000 is DI524 digital input module of ABB S500 series, matching Freelance DCS control system. It collects field discrete switch signals and transfers digital data to main controller. Original new and fully tested refurbished modules are used for DCS cabinet assembly and obsolete automation equipment maintenance replacement.
Description
Product Introduction
1SVP426455R0000 is DI524 digital input module of ABB S500 series, matching Freelance DCS control system. It collects field discrete switch signals and transfers digital data to main controller. Original new and fully tested refurbished modules are used for DCS cabinet assembly and obsolete automation equipment maintenance replacement.
Model Definition
1SVP is fixed part number prefix for ABB S500 DCS I/O spare parts coding. 426455 corresponds to base hardware specification of DI524 digital input module. Suffix R0000 represents factory standard hardware and default firmware without custom modification. DI524 is official model name of this digital input card.
Technical Specifications
The module has 32-channel DC24V digital input. Rated working power supply is DC24V. Operating ambient temperature ranges from -20℃ to +60℃, storage temperature -40℃~+85℃, relative humidity 5%~95% non-condensing. DIN rail installation, protection grade IP20, compliant with CE and UL industrial certification. Each input channel has built-in anti-interference circuit.
Interface and Communication Configuration
Rear internal backplane connector realizes data interaction with rack bus and DCS main controller. Bottom screw terminals connect with field limit switches, proximity sensors and relay auxiliary contacts. No independent external fieldbus port, all signal data transmits through cabinet internal backplane bus.
Core Functions
Detect on-off status of field discrete devices via input channels, convert switching status into digital signals and upload to upper DCS controller. Carry out channel fault diagnosis and send abnormal loop information back to control system when wiring open or short happens.
Application Scenarios
Applied in DCS cabinets of chemical industry, thermal power plant, metallurgy and wastewater treatment, used for signal collection of on-site pumps, fans, valves and conveying equipment auxiliary feedback switches.
Operation and Maintenance Instructions
Cut off rack DC24V power supply before module replacement or field wiring modification and wait residual voltage discharge. Conduct semi-annual maintenance to remove terminal dust with dry compressed air and retighten loose terminals. If channel reading is abnormal, check field sensor and loop wiring condition first before replacing the module.
Get a Quote