A06B-0063-B503 AC Servo Motor Detailed Specification

2. Electrical Specifications

• Rated Voltage: 200–240 VAC, 3-phase, 50/60 Hz

• Rated Current: 3.2 A

• Peak Current: 20 A

• Continuous Output Power: 0.75 kW

• Rated Torque: 3.5 N·m

• Rated Speed: 3000 RPM

• Maximum Speed: 4000 RPM

• Back-EMF Constant: 26 V

• Winding Resistance: 0.94 Ω

• Insulation Class: F

• Brake Voltage: 24 VDC

3. Mechanical Specifications

• Shaft Diameter: Approx. 35 mm

• Mounting: Flange-mounted

• Cooling Method: Natural air cooling

• Noise Level: ≤68 dB(A)

4. Environmental Specifications

• Operating Temperature: 0°C to +40°C

• Storage Temperature: -20°C to +60°C

• Relative Humidity: 40%–80% (non-condensing)

• Altitude: ≤1000 m above sea level

• Vibration Resistance: 0.5 g (10–100 Hz)

5. Key Features

1. Integrated Holding Brake: Equipped with a 24 VDC brake to maintain position when power is off, enhancing safety for vertical or suspended loads.

2. High-Resolution Encoder: The B128iA (128K) incremental encoder delivers precise position and speed feedback for high-precision motion control.

3. IP65 Protection: Dust-protected and resistant to low-pressure water jets, suitable for harsh industrial environments like CNC machine tools and automation lines.

4. Compact & High Torque: Delivers 3.5 N·m rated torque in a compact frame, ideal for space-constrained applications requiring high power density.

5. Maintenance-Free: Brushless design eliminates brush wear; bearings are sealed and pre-lubricated for life under normal operating conditions.

6. Applications

• CNC machine tools (milling machines, lathes, machining centers)

• Industrial robots and automation equipment

• Precision positioning systems

• High-speed pick-and-place machines

• General industrial motion control, especially with vertical-axis requirements

7. Installation Guidelines

1. Mounting: Use flange holes to mount the motor on a rigid, flat, vibration-free surface. Avoid mechanical stress from misalignment.

2. Shaft Alignment: Accurately align motor and load shafts to prevent vibration, noise, and premature bearing wear.

3. Cabling: Use shielded cables for power and encoder wiring to reduce EMI. Separate power and signal cables.

4. Ventilation: Ensure free airflow around the motor; do not block heat-dissipation areas.

5. Encoder & Brake Handling: The encoder is precision—avoid shocks. Connect the brake to a regulated 24 VDC supply.

8. Maintenance

1. Regular Inspection: Check for unusual noise, vibration, or overheating. Inspect cables/connectors for damage or looseness.

2. Cleaning: Keep the motor surface clean of dust, chips, and moisture. Use a dry cloth; avoid water/harsh chemicals.

3. Bearing Maintenance: Bearings are maintenance-free under normal use. Contact FANUC if abnormal noise occurs.

4. Encoder & Brake Care: Keep encoder cables intact. Test brake operation periodically to ensure proper holding force.

9. Safety Precautions

1. Electrical Safety: Disconnect all power before installation/maintenance. Wait ≥15 minutes for capacitors to discharge to prevent electric shock.

2. Mechanical Safety: Do not touch rotating shafts during operation. Secure loads before starting; the brake is for holding, not stopping motion.

3. Environmental Safety: Do not use in explosive, flammable, or corrosive atmospheres unless specially modified.

4. Warranty Note: Warranty excludes damage from liquids, improper installation, misuse, or unauthorized modification.

10. Troubleshooting

• Motor Does Not Run: Check power supply, wiring, servo amplifier status, and alarm codes. Verify brake release (24 VDC applied).

• Abnormal Noise/Vibration: Inspect shaft alignment, mounting rigidity, and bearings. Check for loose components.

• Overheating: Verify ambient temperature, ventilation, and load. Check winding insulation.

• Positioning Error: Check encoder connection, cable integrity, and servo parameters. Inspect mechanical backlash.

• Brake Failure: Test 24 VDC supply; inspect brake wiring and coil resistance.

11. Warranty & Support

• Warranty Period: 1 year from shipment date.

• Repair Service: Available via FANUC or authorized providers.

• Technical Support: Contact FANUC technical support or local distributors for questions.