5CAMPH.0150-30 Pre-terminated Hybrid Drag Chain Connection Cable Product Description

The 5CAMPH.0150-30 is a factory pre-assembled double-ended finished hybrid cable belonging to B&R 5CAMPH product lineup, specially developed for MP40 and MP50 series suspended mobile touch HMI panels. It serves as standardized interconnection between field handheld mobile display unit and cabinet-side 4MPCBX series junction box. Unlike unterminated bare-wire cable 5CAMPH.0150-00 or single-side pre-wired 5CAMPH.0150-10, this model is fully pre-crimped with dedicated connectors at both cable ends for plug-and-field mounting directly. Designed per Austrian industrial specifications and IEC international electrical standards, the single outer-sheath integrated structure consolidates 24VDC SELV power cores, individually shielded star-quad Ethernet twisted pairs, emergency stop signal conductors and safety enable circuit wires into one drag-chain optimized cable, realizing unified transmission of operating power, high-speed network data and safety interlock signals without on-site stripping and terminal crimping work. All finished cables pass continuity check, high-voltage insulation withstand test and shielding attenuation inspection before factory dispatch. The halogen-free flame-retardant PUR outer jacket features superior oil and abrasion resistance to withstand long-term repeated bending inside drag chains and resist electromagnetic interference from on-site servo drives and inverters.

The fixed official part number is 5CAMPH.0150-30 with nominal overall length of 15 meters and permissible length tolerance within ±120 mm. The outer sheath is finished in standard RAL7012 industrial gray, with permanent serial number, part code and production batch continuously printed along the cable exterior for spare part identification and maintenance tracking. Internal wiring adopts high-flex fine-stranded tinned copper with total 25 cores classified into four independent functional groups: three-core plus ground wire for 24VDC SELV power feeding to mobile panel mainboard and backlight, four-core star-quad shielded Ethernet pair pre-terminated with RJ45 plug supporting 10/100Mbps TCP/IP communication, four-core dedicated emergency stop hard wiring and another four-core safety enable signal wiring for safety loop control plus multiple spare auxiliary cores reserved for future function expansion and debugging. One cable end is pre-installed with circular push-pull connector locking into mobile panel port, and the opposite end is equipped with standard RJ45 plug matching cabinet junction box interface. The cable complies with IEC60332-1 vertical flame retardant norm and VDE oil-resistance certification against workshop oil mist, cutting fluid vapor and mild chemical erosion. Standard factory package only contains complete double-ended pre-terminated cable; matching junction boxes, drag chain clamps and wire protection sleeves are not included in default delivery and must be ordered separately based on field layout. Custom fixed core layout and pin definition make this dedicated hybrid cable non-replaceable by discrete ordinary power or network cables.

Positioned as long-distance ready-to-install connecting medium for B&R MP40/MP50 suspended mobile HMI display system, 5CAMPH.0150-30 is widely used on automated production lines with long suspension arm routing where pre-terminated dual-plug cable can drastically shorten field installation cycle compared with raw unterminated cable.

Core power supply function delivers regulated 24VDC safety extra-low voltage from cabinet junction box to mobile touch panel steadily to sustain continuous screen illumination, touch sensing and onboard circuit operation; fatigue-resistant stranded copper structure minimizes conductor breakage risk under long-period cyclic drag and bending to avoid accidental power cut and display shutdown caused by internal short-circuit. Integrated Ethernet communication channel establishes direct point-to-point TCP/IP network link between cabinet PLC host and field mobile HMI without intermediate switches, supporting HMI project offline download, real-time production data upload and remote online fault diagnosis. Independent separated safety signal cores transmit emergency stop and safety enable signals via hardwired isolated loop; once the emergency button on mobile panel is activated, feedback signal is instantly sent back to master controller to trigger fast equipment safety shutdown. Dual-layer shielding consisting of individual pair shielding and overall copper braided shielding effectively suppresses crosstalk between power cores and high-speed communication wires and external electromagnetic disturbance, reducing risks of data packet loss and false safety trigger under complex industrial field environment.

For electrical specifications, rated operating voltage of internal power cores is 30VDC complying with SELV safety standard; overall shielding attenuation meets IEC60096 requirement to ensure consistent anti-interference performance under repeated bending condition. Core insulation passes specified AC high voltage withstand test to avoid insulation breakdown caused by transient grid surge and instantaneous overvoltage fluctuation.

In mechanical performance, minimum dynamic bending radius for drag chain installation is 40 mm to satisfy frequent reciprocating movement of long-distance suspended panel arm; maximum allowable instantaneous pull load is 150 N to endure occasional traction during field maintenance and wiring arrangement. Average unit weight is approximately 132 grams per meter for drag chain and suspension bracket mechanical load calculation.

Regarding environmental adaptability, applicable working temperature ranges from -25°C to +75°C suitable for temperature-controlled electrical room and semi-open variable-temperature production workshop; applicable relative humidity stays between 5% and 95% under non-condensing condition. Halogen-free PUR outer jacket delivers excellent hydrolysis and industrial oil resistance to prevent jacket cracking and inner insulation aging after long-term exposure to mechanical grease and cutting fluid residue.

Common optional supporting fittings include compatible 4MPCBX series compact junction box, spare push-pull connector dust cap, drag chain plastic fixing buckle, abrasion-resistant rubber wire inlet sleeve and anti-friction routing guide ring. Matching junction box serves as core terminal distribution component inside control cabinet for fixed cable connection and signal splitting toward mobile panel; drag chain fittings and rubber sleeves protect outer sheath from sharp metal scratching and extrusion damage during cyclic bending motion.

Routine maintenance supplies include neutral non-corrosive cleaning agent and anti-static soft cloth for regular outer surface cleaning under oily and dusty workshop conditions; sharp cutting tools and strong corrosive solvents are strictly forbidden during maintenance to avoid jacket rupture and internal insulation corrosion. System integrators are recommended to stock spare finished cables for quick field replacement and minimize production downtime induced by cable aging or accidental damage.

5CAMPH.0150-30 is fully compatible with full-range B&R MP40 and MP50 suspended mobile touch panels and corresponding 4MPCBX junction boxes, functioning as essential pre-terminated wiring component of long-distance movable HMI subsystem.

Typical applicable machinery includes automated component assembly production lines, precision electronic processing equipment, food & pharmaceutical packaging machines, small new energy assembly workstations and bench auxiliary injection molding machines equipped with long-arm suspended handheld operation terminals.

In industrial application scope, this 15-meter dual-plug hybrid cable is extensively applied in automotive component automation, precision electronics manufacturing, food packaging and miniature new energy assembly industries. Factory pre-terminated dual-connector design simplifies long-distance suspended HMI field wiring and improves long-term running stability of whole mobile operating control system.

Full production process of 5CAMPH.0150-30 follows ISO9001 international quality management system and original Austrian B&R cable manufacturing standards. Raw copper, insulation compound and PUR jacket material are sourced from certified qualified suppliers with batch incoming inspection before production. Multi-stage in-process inspection covers stranded wire uniformity check, insulation thickness calibration, finished cable cyclic bending fatigue test, high voltage aging test and finished connector pulling force & continuity verification to guarantee each product conforms to official design specification before shipment.

This cable holds valid CE and cULus certification and complies with EU RoHS and EMC directives to satisfy global cross-border export compliance requirements. Optimized anti-fatigue conductor layout and multi-layer shielding structure effectively reduce long-term field failure rate; original manufacturer provides complete after-sales technical support covering model matching confirmation, field wiring guidance and routine troubleshooting consultation. After large-scale practical application on worldwide flexible automation projects, the product gains stable market recognition for reliable bending durability and convenient plug-and-play installation advantage.

Fixed valid ordering part number is confirmed as 5CAMPH.0150-30; complete accurate part code must be specified on purchase orders to prevent wrong delivery of 00-series bare cable or 10-series single-ended pre-terminated variants. All delivered goods are brand-new genuine original B&R products covered under twelve-month factory warranty counted from customer receiving date.

Standard shipment package only contains complete 15-meter double-ended pre-terminated cable; matching junction boxes, drag chain fixing parts and all installation accessories are excluded from default packaging and require separate ordering per customized project configuration. Each shipment is accompanied by full certification documents and detailed packing list with multiple logistics options to ensure intact cargo transportation without jacket extrusion damage. Before final order confirmation, buyers need to verify matched mobile panel and junction box model with authorized distributors or professional engineers to avoid specification mismatch and unnecessary economic loss.