5CAMPH.0150-10 Pre-Terminated Hybrid Connecting Cable Product Description

5CAMPH.0150-10 is factory pre-assembled finished hybrid connecting cable under B&R 5CAMPH product series, exclusively developed for MP40 and MP50 series suspended mobile touch display panels, functioning as standard fixed wiring medium between handheld mobile HMI terminal and cabinet-mounted 4MPCBX small junction box. Differentiated from bare-ended unfinished raw cable like 5CAMPH.0150-00 without pre-installed plugs, this variant is fully pre-terminated at both cable ends with factory crimped dedicated push-pull circular plug on one side matching mobile panel socket and bare flying wire terminals on the opposite end for direct wiring inside cabinet junction box, eliminating on-site core stripping and connector crimping work to shorten field installation cycle. Designed following original Austrian industrial specification and IEC international electrical standards, the integrated single outer sheath structure integrates multiple independent wire groups within one drag-chain-suitable cable, realizing centralized transmission of 24VDC SELV display power supply, shielded Ethernet communication data, emergency stop and safety enable interlock signals required by mobile display control system. Every finished connecting cable completes full factory quality verification including continuity inspection, high voltage insulation withstand test and shielding attenuation testing; halogen-free flame-retardant PUR outer casing is engineered to withstand long-term cyclic reciprocating bending inside equipment drag chain and suppress strong electromagnetic interference generated by on-site servo drives and inverters to guarantee stable continuous operation of suspended display system.

Official fixed ordering part number is defined as 5CAMPH.0150-10 with standard nominal overall length of 15 meters and length tolerance controlled within ±120mm; outer sheath adopts standard industrial RAL7012 grey finish, with continuous permanent laser marking of part number and production batch information along cable outer surface for spare part management and maintenance traceability. Internal structure consists of total 25 fine-stranded tinned copper conductors divided into four mutually isolated functional core sets: three-core plus grounding wire for 24VDC safety extra-low voltage power feed to sustain display backlight, touch module and onboard circuit power consumption, four-core individually star-quad shielded twisted pair supporting 10/100Mbps TCP/IP Ethernet data interaction between cabinet PLC and field mobile display, separated four-core emergency stop hardwire and four-core safety enable signal wire for independent safety interlock circuit, plus several spare auxiliary cores reserved for subsequent function upgrade and debugging wiring expansion. The cable acquires IEC60332-1 vertical flame retardant certification and VDE industrial oil resistance qualification, able to resist workshop cutting oil mist, mechanical grease vapor and mild volatile chemical erosion. Standard factory delivery comes as complete pre-terminated connecting cable with one end assembled factory push-pull circular connector and opposite open bare wire end; matched cabinet junction box, drag chain fixing buckles and wire protective sleeves are not included in original packaging and need separate procurement based on project wiring layout. Fixed internal core arrangement and dedicated core color coding make this specialized hybrid connecting cable irreplaceable by common split power cord or commercial-grade network cable.

Positioned as standardized pre-made connecting cable for B&R MP40/MP50 suspended mobile display control system, 5CAMPH.0150-10 targets fixed-distance suspended arm installation occasions where rapid on-site wiring is required and customized terminal assembly is unnecessary.

Integrated power supply function delivers stable 24VDC SELV power from cabinet junction box to mobile display mainboard via pre-finished wiring, maintaining consistent screen lighting and normal touch response; ultra-fine stranded anti-fatigue copper conductor design effectively lowers wire breakage risk under repeated drag bending to avoid unexpected display blackout caused by internal circuit short circuit. Predefined Ethernet transmission channel enables direct point-to-point network communication between host PLC and mobile touch display without intermediate switching equipment, supporting online program downloading, real-time production data upload and remote display parameter modification. Independent separated safety signal cores achieve isolated hardwire transmission of emergency stop and enable trigger signals; once the emergency stop button mounted on mobile display is pressed, feedback signal is instantly transmitted to main control system to implement immediate equipment safety shutdown protection. Double-layer shielding composed of single-pair independent inner shielding and full copper braided overall outer shielding efficiently restrains electromagnetic crosstalk between power cores and high-speed communication lines, reducing screen flicker, data packet loss and accidental false safety triggering under complicated industrial electromagnetic environment.

In electrical performance, rated working voltage of internal power conductors is 30VDC complying with global SELV safety specification; overall shielding attenuation performance conforms to IEC60096 standard to retain steady anti-interference capability during long-cycle drag bending movement. Core insulation material passes strict AC high voltage withstand test to prevent insulation breakdown induced by instantaneous grid surge and field transient overvoltage fluctuation.

For mechanical indicators, minimum dynamic bending radius under drag chain installation reaches 40mm to satisfy frequent reciprocating bending requirement of long-distance suspended display routing; maximum allowable instantaneous pulling tension is 150N to bear accidental pulling force during field installation and equipment maintenance. Average unit cable weight is approximately 132 grams per meter for drag chain load calculation and suspension bracket structural design reference.

Regarding environmental adaptability, applicable working ambient temperature range covers -25°C to +75°C, fitting constant-temperature enclosed electrical workshop and semi-open variable-temperature processing site; applicable relative humidity ranges from 5% to 95% under non-condensing operating condition. Halogen-free PUR outer jacket owns superior hydrolysis resistance and industrial oil-proof property to avoid outer sheath cracking and inner insulation ageing after long-term contact with workshop cutting fluid and mechanical lubricant residue.

Common optional supporting fittings include compatible 4MPCBX series small cabinet junction box, MP series matching spare push-pull circular plug, drag chain dedicated plastic fixing buckle, abrasion-resistant rubber wire inlet protective sleeve and anti-friction routing guide ring. Matched junction box serves as internal cabinet terminal distribution component for bare wire terminal fixed wiring of cable tail; spare connectors are prepared for replacement when original plug suffers damage during long-term usage. Drag chain fasteners and rubber protective sleeves prevent cable outer sheath from scratch and extrusion damage caused by sharp metal drag chain edges during continuous cyclic bending.

Conventional daily maintenance auxiliary supplies include neutral non-corrosive cleaning agent and anti-static soft wiping cloth for regular outer sheath decontamination under oily and dusty workshop environment; sharp cutting tools and strong corrosive chemical solvent are forbidden during maintenance process to avoid outer casing rupture and internal core insulation corrosion. Automation system integrators are recommended to reserve spare finished connecting cables to realize quick replacement once original cable is worn or aged.

5CAMPH.0150-10 is fully compatible with full-range B&R MP40 and MP50 suspended mobile touch display panels as well as corresponding 4MPCBX junction boxes, acting as standard pre-assembled wiring component for mobile HMI display subsystem.

Typical matched mechanical equipment includes automated component assembly production line, precision electronic processing equipment, food and pharmaceutical packaging machinery, miniature new energy component assembling workstation and bench-type auxiliary injection molding machine equipped with suspended handheld operation display terminal.

In industrial application scope, this 15-meter pre-terminated hybrid connecting cable is widely applied in automotive spare parts automatic manufacturing, precision electronics production, food packaging processing and small new energy assembly industries; factory pre-terminated design simplifies on-site wiring construction and improves long-term stable operation reliability of whole suspended mobile display control system.

Full production procedure of 5CAMPH.0150-10 is implemented under ISO9001 international quality management system and original Austrian B&R cable manufacturing technical standards; raw copper conductor, insulating compound and PUR outer sheath raw materials are sourced from certified qualified upstream suppliers with batch incoming parameter inspection before formal production. Multi-stage in-process quality control covers stranded wire uniformity detection, insulation thickness calibration, finished cable cyclic bending fatigue ageing test, high voltage withstand verification and core continuity inspection, and pre-terminated connector pulling force testing to confirm each finished connecting cable meets official design specification before factory delivery.

The product holds valid CE and cULus certification and complies with EU RoHS hazardous substance restriction regulation and EMC electromagnetic compatibility directive to satisfy global equipment export access requirements. Optimized anti-fatigue conductor layout and multilayer shielding structure effectively reduce field failure rate under long-term cyclic drag working condition; original manufacturer provides complete after-sales technical service including model matching confirmation, on-site wiring guidance and routine field fault troubleshooting consultation. After extensive practical application on numerous flexible automation projects worldwide, the product gains consistent market recognition for stable bending durability and convenient plug-and-play installation characteristic.

Unique valid ordering part number is fixed as 5CAMPH.0150-10, complete accurate part code must be filled on purchase order to prevent wrong delivery of bare-end 00 suffix raw cable or full double-ended plug 30/40 variant finished cables. All delivered products are brand-new original genuine B&R goods covered under twelve-month factory warranty calculated starting from customer receiving date.

Standard shipment package only contains complete 15-meter pre-terminated hybrid connecting cable; matched junction box, all kinds of spare connectors, drag chain fixing accessories and installation auxiliary parts are excluded from default packing scope and require independent ordering according to personalized project field layout demand. Each delivery batch is attached with complete certification document and detailed packing list with diversified logistics options to guarantee intact cargo transportation without outer sheath extrusion damage during transit. Before final order confirmation, purchasers need to verify matched mobile display panel model and junction box specification with authorized distributor or professional technical engineer to avoid specification mismatch and unnecessary economic loss.