5CAMPC.0020-10 Composite Connection Cable Product Description

The 5CAMPC.0020-10 is a 2-meter fixed-length integrated composite connection cable designed by B&R exclusively for MP series Mobile Panel movable touchscreen systems. It serves as short-range fixed internal cabinet wiring to link main control unit and compact 4MPCBX series junction box, differentiated from long-distance drag-chain type 5CAMPB cables for field suspended mobile panel routing. Developed per Austrian industrial standards and relevant IEC electrical norms, this single-jacketed composite cable integrates 24VDC SELV power cores, shielded Ethernet twisted pairs, safety enable circuit conductors and auxiliary signal cores together, enabling centralized delivery of operating power, high-speed network data and safety interlock signals in one single cable to simplify compact cabinet internal wiring layout. All finished cables pass full continuity test, high voltage insulation withstand inspection and shielding performance verification before factory dispatch to ensure steady signal transmission against electromagnetic interference from inverters and servo drives inside dense control cabinets. The outer jacket adopts halogen-free flame-retardant PUR material featuring compact outer diameter and good oil resistance, specially engineered for static fixed installation without frequent bending and dragging.

The fixed official ordering part number is 5CAMPC.0020-10 with standard nominal length of 2 meters and allowable length tolerance within ±50 mm. Outer sheath adopts RAL7012 standard industrial gray color, with continuous permanent marking of part number and production batch printed along cable surface for spare part identification and on-site maintenance management. Internal conductors use fine-stranded tinned copper optimized for stationary cabinet wiring, split into multiple independent functional core groups: three-core 24VDC power and grounding set for junction box power supply, shielded four-core Ethernet twisted pair pre-terminated with RJ45 plug supporting 10/100Mbps communication, multi-core dedicated wiring for emergency stop and safety enable interlock signals and a small set of spare auxiliary cores for equipment debugging access. The cable conforms to IEC60332-1 vertical flame retardant standard and passes VDE oil resistance certification to resist cabinet dust, volatile machine oil mist and mild chemical erosion. Standard factory packaging includes only fully pre-terminated complete cable; matched junction boxes, cable clamps and fixing accessories are not included in default package and need separate ordering as per cabinet configuration. Due to customized internal core layout and dedicated Ethernet wiring definition, this composite cable cannot be replaced by ordinary discrete single-core cables or standard commercial network cables.

Positioned as dedicated short-distance cabinet internal connecting cable for B&R MP mobile HMI solution, 5CAMPC.0020-10 realizes centralized power and multi-signal transmission between cabinet-mounted controller and compact junction box, mainly applied for small-sized automation equipment cabinet assembly, workstation mobile panel configuration and legacy compact control cabinet renovation projects.

Core power delivery function feeds stable 24VDC safety extra-low voltage from cabinet power supply to mobile panel junction box to sustain normal startup and continuous operation of touch terminal; built-in wiring protection structure prevents component damage caused by accidental internal short-circuit inside closed cabinet. Integrated Ethernet communication function establishes direct point-to-point TCP/IP connection between PLC host and mobile touch screen without intermediate switching equipment, supporting HMI project download, real-time production data upload and remote online fault diagnosis. Independent safety signal cores reliably transmit emergency stop and safety interlock status from handheld panel back to main controller to trigger immediate equipment protection shutdown once safety loop is cut off. Full overall shielding structure effectively suppresses electromagnetic crosstalk between power lines and high-speed communication cores and reduces outside interference induced by surrounding power components, lowering risks of data packet loss and intermittent communication breakdown in densely wired cabinets.

For electrical specifications, rated working voltage of internal power cores is 30VDC complying with SELV safety requirements; overall shielding structure meets IEC60096 attenuation criteria to guarantee outstanding anti-interference performance for short-distance cabinet transmission. Core insulation withstands specified AC high voltage test to avoid insulation breakdown triggered by instantaneous grid surge and transient overvoltage.

In mechanical characteristics, minimum static fixed bending radius is 25 mm to fit narrow cabinet routing layout; designed for stationary installation only without regular reciprocating drag, maximum allowable short-term pull force is 120 N to endure occasional pulling during cabinet maintenance. Average unit weight stands around 125 grams per meter for cabinet load calculation during mechanical design.

Regarding environmental adaptability, applicable working temperature ranges from -25°C to +70°C, suitable for temperature-controlled electrical rooms and semi-sealed production cabinets with floating dust and periodic temperature fluctuation. Applicable relative humidity covers 5%~95% under non-condensing environment. PUR outer jacket delivers excellent hydrolysis and industrial oil resistance to prevent casing aging cracking under long-term exposure to cabinet oil vapor and volatile cutting fluid residue.

Common optional supporting accessories include compatible 4MPCBX compact junction box, RJ45 dustproof cap, plastic cable ties, mini wiring fixing clips and rubber wire inlet sleeves. Junction box works as core terminal distribution component for cable end wiring separation toward mobile touch terminal; fixing fittings and rubber sleeves protect outer sheath against sharp cabinet metal edge scratching and extrusion damage during dense wiring arrangement.

Recommended daily maintenance supplies include neutral non-corrosive cleaner and anti-static soft cloth for regular outer surface cleaning in oily and dusty cabinet environment; sharp cutting tools and strong corrosive solvents are strictly prohibited to avoid jacket damage and internal insulation corrosion. Equipment integrators are advised to stock spare cables to achieve rapid on-site replacement and shorten production downtime caused by cable ageing or accidental damage.

5CAMPC.0020-10 is fully compatible with full B&R MP series mobile touch panels and matched compact junction boxes, serving as essential internal wiring component of movable HMI subsystem inside small automation control cabinets.

Typical applicable machinery covers compact automatic assembly equipment, precision electronic testing machines, mini food packaging devices, small auxiliary injection molding machines and bench-type new energy component assembling workstations equipped with cabinet-built mobile operating panels.

In industrial application scope, this short composite cable is widely used in precision electronic automation, miniature packaging equipment, laboratory test machinery and small new energy assembly industries. Its integrated single-cable structure optimizes cabinet space utilization and shortens field wiring construction cycle for compact mobile HMI projects.

The whole production process of 5CAMPC.0020-10 is implemented under ISO9001 international quality management system and original B&R Austrian cable manufacturing specifications. Raw copper, insulation compound and outer sheath material are sourced from certified qualified suppliers with batch incoming inspection before production. Multi-stage in-process inspection includes stranded wire consistency check, insulation dimension calibration, finished cable high voltage aging test and terminal continuity verification to ensure each finished product meets official design requirements before shipment.

This cable is certified with CE and relevant safety approvals and complies with EU RoHS and EMC directives to satisfy global export compliance standards. Optimized internal core grouping and full shielding design reduce long-term field failure rate; original manufacturer provides complete after-sales technical service covering model matching confirmation, wiring guidance and routine troubleshooting consultation. After extensive field application on various compact automation projects globally, this cable gains consistent market recognition for stable transmission performance and compact installation advantages.

Fixed valid ordering part number is 5CAMPC.0020-10; complete accurate part code must be marked on purchase order to prevent incorrect delivery of mismatched substitute cables. All supplied products are brand-new genuine original B&R goods with twelve-month factory warranty starting from customer receiving date.

Standard delivery package only contains complete pre-terminated 2-meter cable; junction boxes, fixing clips and all installation fittings are excluded from default packing and require separate ordering per customized project configuration. Each shipment is accompanied by complete certification documents and detailed packing list with multiple available logistics options to avoid outer jacket extrusion damage during transit. Before final order confirmation, buyers need to verify matched mobile panel and junction box model with authorized distributors or professional engineers to avoid specification mismatch and unnecessary economic loss.