Model Interpretation

CC=C300 C-series I/O family; PAIM=Process Analog Input Multi-range; 01=standard 16-channel specification code.

Technical Specifications

Power: 24VDC via backplane, typical power consumption 4.3W

Channel: 16 configurable single-ended /8 differential input; support 4–20mA,1–5VDC, RTD, TC thermocouple signals

Accuracy: 22-bit AD conversion, ±0.075%FS precision; channel-backplane isolation 1500VAC

Ambient: Operating -40℃~+70℃, RH5%~95% non-condensing; UL/CE, Class I Div.2 certification

Interface and Communication Configuration

Front panel LED indicators: Power, Run, Fault; rear gold finger connected to IOTA base, all field sensor wiring terminated on IOTA terminal block, no HART communication port.

Core Function

Collect temperature (RTD/TC), pressure, flow conventional analog signals and convert to digital value for C300 controller PID calculation.

Auto detect open-circuit, over-range for field loop and upload fault alarm to Experion HMI.

Multi-type signal flexible configuration via system software without hardware modification.

Applicable Scenarios

Thermal power plant boiler, conventional chemical workshop non-smart instrument cabinet, site with ordinary passive transmitters and thermal elements.

Operation and Maintenance Instructions

Mount on standard C300 IOTA base; hot swappable during system live running; spare module automatically loads configuration after power-on without offline programming.

CC-PAIN01

Product Introduction

CC-PAIN01 is Honeywell C300 high-precision isolated non-HART analog input module, 8-channel per-channel galvanic isolation design for strong EMI industrial environment, no built-in HART protocol.

Model Interpretation

CC=C300 I/O series; PAIN=Process Analog Input Isolated; 01=8 full isolated channel version.

Technical Specifications

Power: Backplane 24VDC supply, typical 4.8W power consumption

Channel:8 fully galvanic isolated input, signal range 4–20mA /1–5VDC

Isolation: Per-channel 2500VAC isolation to eliminate ground loop interference

Operating Temp:-40~+70℃; CE/UL, ATEX Zone2 approved

Interface and Communication Configuration

Front status LED: Power, Healthy, Channel Alarm; rear docking exclusive IOTA terminal base for field wiring connection.

Core Function

Anti-interference analog signal sampling for field with large motor, inverter layout, prevent signal drift caused by ground potential difference.

Independent channel fault diagnosis for wire break and overload, real-time fault reporting to DCS control system.

Applicable Scenarios

Metallurgy, coal chemical, waste gas recovery high-electromagnetic interference control cabinet.

Operation and Maintenance Instructions

Use shielded twisted-pair field cable with single-end shield grounding; support hot replacement, no parameter download needed after spare installation.