5AP951.1505-01 Industrial Color Display Product Description
The 5AP951.1505-01 belongs to B&R AP951 Automation Panel 900 product lineup, a 15-inch XGA integrated industrial color TFT display with built-in analog resistive single-point touch and full integrated mechanical key array, exclusively developed to match PPC900 and APC series industrial automation panel PCs. Produced under B&R’s global industrial manufacturing standards, the product passes CE, UKCA certification and complies with EU RoHS and EMC control directives to satisfy global industrial application compliance requirements. Combining high-definition color display, industrial touch input and physical membrane function keys into one compact embedded unit, it realizes on-site equipment running data display, parameter setup, equipment start-stop operation and fault alarm reset for automated production systems. All finished products complete long-period LED backlight aging test, full-area touch calibration, key life durability test and high-low temperature cyclic aging inspection before factory delivery. The front panel adopts sealed hard-anodized aluminum framework reaching IP65 front protection grade to resist workshop cutting fluid splash, floating oil mist and metal dust contamination, applicable for original equipment supporting assembly and aged cabinet operation panel replacement renovation across multiple automation industries. Fanless passive cooling structure eliminates cooling fan failure risk and supports uninterrupted 24-hour continuous production operation under severe on-site working conditions.
Description
5AP951.1505-01 Industrial Color Display Product Description
Product Overview
The 5AP951.1505-01 belongs to B&R AP951 Automation Panel 900 product lineup, a 15-inch XGA integrated industrial color TFT display with built-in analog resistive single-point touch and full integrated mechanical key array, exclusively developed to match PPC900 and APC series industrial automation panel PCs. Produced under B&R’s global industrial manufacturing standards, the product passes CE, UKCA certification and complies with EU RoHS and EMC control directives to satisfy global industrial application compliance requirements. Combining high-definition color display, industrial touch input and physical membrane function keys into one compact embedded unit, it realizes on-site equipment running data display, parameter setup, equipment start-stop operation and fault alarm reset for automated production systems. All finished products complete long-period LED backlight aging test, full-area touch calibration, key life durability test and high-low temperature cyclic aging inspection before factory delivery. The front panel adopts sealed hard-anodized aluminum framework reaching IP65 front protection grade to resist workshop cutting fluid splash, floating oil mist and metal dust contamination, applicable for original equipment supporting assembly and aged cabinet operation panel replacement renovation across multiple automation industries. Fanless passive cooling structure eliminates cooling fan failure risk and supports uninterrupted 24-hour continuous production operation under severe on-site working conditions.
Basic Information
The fixed official ordering part number is 5AP951.1505-01 with standardized embedded installation outline dimension designed for universal cabinet cutout mounting of AP900 platform equipment. The rear casing is equipped with proprietary Automation Panel Link dedicated bus slot for high-speed host communication, plus multiple built-in USB2.0 Type-A interfaces for program downloading and field data backup, and adopts lock-type anti-drop wiring terminals to avoid intermittent communication failure caused by long-term cabinet mechanical vibration and accidental wire pulling. Front aluminum frame undergoes anti-static hard oxidation treatment with integrated compression sealing ring to stabilize front IP65 dustproof and waterproof performance; complete part number, production batch code and unique single-unit serial number are permanently laser engraved on rear shell for full-lifecycle production traceability and standardized inventory management. Internal TFT screen module, touch control PCB, key circuit board and all structural components apply UL94-V0 flame retardant raw materials conforming to RoHS hazardous substance restriction standards. Standard factory packaging only contains the main display body; dedicated 24VDC power connector, fixed mounting accessories and matching panel link communication cables need independent separate procurement according to on-site cabinet layout requirements. This model keeps good mechanical and electrical interchangeability within AP951 sub-series for convenient spare part stock management and quick field replacement maintenance.
Function and Positioning
Positioned as all-in-one human-machine interaction core component of AP900 control architecture, 5AP951.1505-01 connects with rear-end PPC/APC industrial host via exclusive panel bus to build complete on-site monitoring and operating system, widely used in new automation equipment original assembly and defective operation panel upgrading replacement of in-service production line control cabinets. Differentiated from regular AP920 touch-only screens, this unit integrates complete membrane key layout including customized soft keys, function shortcut keys and numeric cursor control keys with embedded yellow LED backlight for each individual key, enabling dual operation modes of screen touch and physical button input to adapt diversified operating habits and complex workshop operation scenarios.
Core color display function renders real-time equipment operating curves, production statistical data, running parameter values and fault prompt information with abundant color restoration effect; digitally adjustable constant-current LED backlight supports brightness modification to adapt high-brightness open workshop and dim enclosed control room environment for optimal reading definition. Integrated industrial analog resistive touch layer completes quick page switching and parameter fine-tuning, while the matched physical key array realizes fast mode switching, emergency stop triggering and shortcut function access without extra external keyboard connection. Multi-layer EMC filtering circuit is embedded inside mainboard to suppress electromagnetic interference from nearby servo drives and inverters inside compact control cabinet, effectively preventing screen flicker, color shift and false touch or key mis-trigger induced by complex industrial electromagnetic field. Fully sealed front structure blocks liquid splashing and particulate pollutant penetration to protect inner electronic circuits from short-circuit damage caused by accumulated dirt and oil contamination. Reserved rear USB interfaces facilitate offline program update and production data storage export to simplify daily equipment maintenance workflow, and the panel supports functional expansion by installing optional Display Link expansion card matching PPC300 accessory modules per project upgrade demands.
Core Performance Parameters
For display optical indicators, the unit carries industrial-grade 15-inch TFT color screen with standard XGA 1024×768 resolution and wide industrial color gamut, LED constant-current backlight with adjustable brightness range and long half-brightness service life to lower subsequent maintenance replacement cost. Front analog resistive touch overlay receives high-hardness scratch-resistant treatment to withstand frequent repeated pressing during daily industrial operation and maintains stable positioning precision under long-time usage. All integrated physical keys pass over one million times press durability test with uniform LED backlight brightness for each key to guarantee consistent long-period triggering sensitivity.
In electrical specifications, rated working power supply is 24VDC direct current input via dedicated rear terminal; built-in overvoltage, overcurrent, ESD surge and short-circuit protection circuit automatically cuts off power supply under abnormal voltage fluctuation to protect internal display, touch and key control chips against burnout damage. Optimized PCB wiring layout plus internal metal shielding layer ensures stable high-speed bidirectional data transmission through proprietary panel bus between display and host controller without occupying excessive main control computing resources.
Regarding environmental adaptability data, rated continuous working ambient temperature ranges from 0°C to +55°C under standard horizontal installation, with slightly narrowed upper limit under inclined mounting angles; allowable storage and transportation temperature covers -25°C to +70°C, applicable working relative humidity maintains 5%~95% under non-condensing status to adapt both constant-temperature central control room and dusty, oily open production workshop. The product has passed damp heat endurance test and specified random vibration certification to retain stable display, touch and key performance under temperature fluctuation and continuous mechanical oscillation conditions; all plastic structural accessories comply with international industrial flame retardant safety specifications to improve overall application safety.
General Matching Accessories
Common optional supporting fittings for 5AP951.1505-01 include dedicated shielded Automation Panel Link communication cables, embedded fixed mounting clips, spare front sealing gaskets, exclusive 24VDC power plug terminal and swing arm installation flanges. Elastic sealing gaskets fill assembly gaps between display outer frame and cabinet mounting plane to further enhance front IP65 protection capability and absorb long-term vibration transmitted from cabinet framework during equipment continuous running. Display Link expansion cards and PPC300 matching modules are optional upgrade accessories for system function expansion and multi-screen extension requirements.
Daily maintenance auxiliary supplies include anti-static soft wiping cloth and low-pressure air blowing tool for periodic front screen and key surface dust cleaning; regular maintenance is recommended every two to three months according to on-site dust and oil concentration level, and corrosive chemical solvent, sharp hard scraping tools and high-pressure water flushing are strictly prohibited to avoid front sealing layer damage and internal circuit corrosion failure. This display can be flexibly matched with full-range AP900 series blank cover plates and auxiliary installation parts to form diversified customized HMI layout schemes; it is recommended for equipment integrators and end manufacturers to reserve proper quantity of spare display unit and vulnerable accessories such as sealing gaskets for rapid field replacement and minimize production downtime loss caused by HMI breakdown.
Applicable Equipment and Fields
The 5AP951.1505-01 achieves full mechanical and electrical compatibility with mainstream B&R PPC900 and APC series automation industrial PCs, installed via embedded fixation on cabinet reserved cutout and cooperating with backend PLC controller, servo driving system and field I/O modules to constitute complete HMI subsystem of industrial automation control system.
Typical matched terminal equipment includes CNC machine tool integrated operation station, automated assembly line centralized monitoring panel, industrial robot master control cabinet, intelligent food packaging machine operation terminal and precision processing equipment man-machine unit deployed inside pharmaceutical and new energy production workshops.
In industrial application coverage, the product is widely deployed across precision mechanical processing, textile automation, food and beverage manufacturing, automatic packaging, intelligent warehousing logistics and new energy equipment production industries. Its rugged sealed structure design, dual touch-key operation mode and outstanding harsh-environment resistance make it preferred matching operation display for new equipment assembly and old control cabinet renovation projects under complex working conditions with heavy dust, oil mist and frequent ambient temperature variation.
Certification and Quality Description
Full production process of 5AP951.1505-01 follows ISO9001 international quality management system and original B&R Austrian industrial electronic production specifications. Core raw materials of TFT panel, touch film, key PCB and structural fittings are sourced from formally certified qualified global suppliers with batch-by-batch incoming parameter inspection before formal assembly; multi-stage in-process quality inspection includes frame assembling check, internal circuit parameter calibration, long-time powered aging test and complete host compatibility verification to confirm each finished product conforms to official design specifications before factory outbound delivery.
This color display holds valid CE and UKCA certification and satisfies EU EMC and RoHS regulatory requirements to meet cross-border global trade compliance standards. Adopting mature industrial TFT, analog resistive touch and membrane key circuit design plus precision automated assembly craftsmanship, the product features low inherent failure rate and long rated service lifespan under specified operating environment; original manufacturer provides comprehensive after-sales technical services covering model matching confirmation, field installation technical guidance and regular equipment fault diagnosis consultation. After long-term practical verification on numerous global industrial sites, this AP951 series integrated display gains extensive market recognition for stable comprehensive performance and consistent original factory quality control.
Ordering and Delivery Instructions
Exclusive valid ordering part number is fixed as 5AP951.1505-01; complete accurate part code must be submitted during order placement to prevent incorrect product shipment. All delivered products are brand-new genuine original B&R goods covered by standard twelve-month factory warranty calculated starting from customer receiving date.
Standard delivery package only contains standalone main display body; power connector, communication cables and all installation accessories are not included within default packing scope and require separate ordering according to personalized project configuration demands. Each shipment is attached with complete certification documents and detailed packing list with multiple optional logistics transportation solutions to ensure intact cargo delivery to destination. Before final order confirmation, purchasers need to verify matched PPC/APC host model and required purchase quantity with authorized distributors or professional technical engineers to avoid specification mismatch and unnecessary economic loss.
Get a Quote