5AC600.CANI-00 Touch Screen Integrated CAN Interface Module Product Description
The 5AC600.CANI-00 is an integrated industrial touch screen with built-in CAN bus communication interface, developed by B&R and belonging to the 5AC600 series of human-machine interaction and communication integration products. It combines high-performance industrial touch display unit and dedicated CAN bus communication module into one compact device, realizing the dual functions of on-site operation monitoring and CAN bus data communication. Designed for seamless matching with B&R APC620, APC800, PPC700 series automation PCs and industrial control systems, this product adopts industrial-grade TFT liquid crystal display, high-precision touch sensing technology and professional CAN controller chip, fully complying with CAN 2.0A and CAN 2.0B protocol standards. Manufactured strictly in accordance with B&R original industrial production specifications and international electrical safety, electromagnetic compatibility and environmental protection standards, each unit undergoes multiple rigorous tests including long-term aging test, high and low temperature cycle test, vibration test, surge protection test and touch accuracy calibration during production. Featuring stable display effect, sensitive touch operation, reliable communication transmission and strong environmental adaptability, it can operate continuously and stably in harsh industrial environments with complex electromagnetic interference, mechanical vibration, dust and humidity. It is widely applied in automated production lines, numerical control machine tools, intelligent packaging machinery, textile equipment, industrial robots and on-site bus control systems, meeting the integrated requirements of man-machine operation, status monitoring and CAN bus networking communication in various industrial automation scenarios.
Description
5AC600.CANI-00 Touch Screen Integrated CAN Interface Module Product Description
Product Overview
The 5AC600.CANI-00 is an integrated industrial touch screen with built-in CAN bus communication interface, developed by B&R and belonging to the 5AC600 series of human-machine interaction and communication integration products. It combines high-performance industrial touch display unit and dedicated CAN bus communication module into one compact device, realizing the dual functions of on-site operation monitoring and CAN bus data communication. Designed for seamless matching with B&R APC620, APC800, PPC700 series automation PCs and industrial control systems, this product adopts industrial-grade TFT liquid crystal display, high-precision touch sensing technology and professional CAN controller chip, fully complying with CAN 2.0A and CAN 2.0B protocol standards. Manufactured strictly in accordance with B&R original industrial production specifications and international electrical safety, electromagnetic compatibility and environmental protection standards, each unit undergoes multiple rigorous tests including long-term aging test, high and low temperature cycle test, vibration test, surge protection test and touch accuracy calibration during production. Featuring stable display effect, sensitive touch operation, reliable communication transmission and strong environmental adaptability, it can operate continuously and stably in harsh industrial environments with complex electromagnetic interference, mechanical vibration, dust and humidity. It is widely applied in automated production lines, numerical control machine tools, intelligent packaging machinery, textile equipment, industrial robots and on-site bus control systems, meeting the integrated requirements of man-machine operation, status monitoring and CAN bus networking communication in various industrial automation scenarios.
Basic Information
The complete model number of the product is 5AC600.CANI-00, which is an all-in-one integrated device integrating touch screen display and CAN communication interface, adopting an integrated enclosure structure and lightweight design. The main body uses high-strength industrial-grade engineering plastic and aluminum alloy composite materials, with the front panel coated with anti-glare and wear-resistant protective layer, effectively resisting daily scratches and light pollution. The whole machine adopts embedded installation design, with unified standard installation dimensions and fixing structure, supporting cabinet embedded installation and wall-mounted installation, featuring accurate positioning, firm fixing and convenient disassembly. The internal structure is reasonably partitioned, with independent display drive unit, touch control unit and CAN communication circuit unit, effectively avoiding signal crosstalk between different functional modules.
This product adopts unified bus power supply matched with B&R automation control system, without independent external power interface, simplifying on-site wiring. It is equipped with a standard industrial touch screen on the front, supporting multi-point touch operation and gesture control, and built-in high-brightness LED backlight with adjustable brightness to adapt to different ambient light conditions. On the side or rear of the device, there is one standard 9-pin male DSUB CAN communication interface, equipped with a sliding switch for manually enabling or disabling the built-in CAN bus terminating resistor, and the terminating resistor is set to disabled by default upon factory delivery. The device is configured with multiple status indicator lamps, which can separately display power-on status, touch operation status, CAN data sending and receiving status and fault alarm status, facilitating on-site personnel to view the working condition in real time.
Each finished product passes comprehensive factory tests including display effect test, touch accuracy test, communication function test, insulation withstand voltage test and environmental adaptation test before leaving the factory. The standard package only contains the integrated touch screen and CAN interface device body. Dedicated communication cables, power connection wires, installation brackets, sealing gaskets and other matching accessories need to be purchased separately according to actual application needs. Clear model number, production batch, serial number and certification marks are printed on the surface of the device, facilitating product identification, quality traceability and on-site inventory management. The whole product follows B&R unified modular design standards, with good interchangeability and compatibility with other products of the same series.
Function and Positioning
Positioned as an integrated human-machine interaction and CAN bus communication terminal for B&R industrial automation systems, the 5AC600.CANI-00 serves as a key link connecting operators, on-site equipment and the upper control system. It integrates two core functions of industrial touch screen and CAN communication interface, which can not only realize real-time display of equipment operating data, production parameters, running status and fault information, and support operators to complete parameter setting, equipment start-stop, mode switching and other operation instructions through touch screen, but also undertake the task of data transmission and instruction interaction on the CAN bus network. It is widely used in conjunction with PLCs, servo drives, frequency converters, remote I/O modules, industrial sensors and other CAN bus devices, effectively simplifying the system structure and reducing the type and quantity of on-site equipment.
In terms of touch display and human-machine interaction, the built-in industrial TFT display has high resolution, rich color restoration and wide viewing angle, ensuring clear and stable picture display in various working environments. The high-precision touch sensing layer has fast response speed, accurate positioning and long service life, supporting long-time frequent touch operation without drift or failure. The adjustable backlight function can flexibly adjust the screen brightness according to the brightness of the on-site working environment, which is convenient for operators to view and operate under strong light or dim light conditions. The device supports customized interface development and screen program download, which can be edited and configured according to different production processes and equipment control requirements, meeting the personalized operation and monitoring needs of different industries and equipment.
In terms of CAN bus communication, the product is equipped with Intel 82527 dedicated CAN controller, fully complying with CAN 2.0A and CAN 2.0B international protocol standards, and supporting non-maskable interrupt triggering to ensure timely and reliable response of communication signals. It supports multiple adjustable communication baud rates and flexible configuration of communication parameters such as data format and filter, adapting to the communication rate requirements of various CAN bus devices on industrial sites. The built-in optoelectronic isolation circuit and multi-level protection components such as ESD, overvoltage and overcurrent can effectively isolate external surge voltage, static electricity and electromagnetic interference, protect the touch screen itself and the entire CAN bus network from electrical damage, and improve the stability and safety of long-distance data transmission. The configurable CAN bus terminating resistor can be switched on and off manually according to the actual bus length and the number of connected nodes, eliminating signal reflection and ensuring complete and undistorted signal transmission.
In terms of system operation and protection, the device has built-in complete overcurrent, short circuit, reverse voltage and over temperature protection logic. When abnormal conditions such as circuit fault, excessive temperature and abnormal voltage occur, it will automatically trigger protection actions and send out fault alarms to avoid equipment damage and ensure continuous and stable operation of the whole system. In terms of operation and maintenance, the intuitive status indicator lamps and fault alarm function help maintenance personnel quickly locate and troubleshoot faults. It supports online program debugging, data monitoring and remote parameter configuration, and can cooperate with upper monitoring software to complete equipment diagnosis and maintenance work, effectively reducing equipment downtime. This product is suitable for new automation equipment assembly and upgrading and transformation of old equipment, with strong versatility and excellent compatibility with B&R full series of industrial control products.
Core Performance Parameters
In electrical performance, the device adopts bus power supply, with low overall power consumption and stable power adaptation capability. The internal circuit has high insulation strength and withstand voltage level, complying with international industrial electrical safety standards, realizing complete electrical isolation between the display touch circuit and the CAN communication circuit, and between the internal system and the external field circuit. The multi-level protection system composed of overvoltage, overcurrent, ESD and reverse connection protection components provides all-round electrical protection for the whole equipment. The display drive circuit and CAN communication circuit both have low signal distortion and high transmission accuracy, with extremely low data error rate and packet loss rate during long-term operation and long-distance transmission. The whole machine has excellent electromagnetic compatibility, and can work normally in complex electromagnetic environments with inverters, high-power motors and other interference sources.
In display and touch performance, the industrial TFT liquid crystal display has high resolution, high color saturation and wide viewing angle, with stable picture and no flicker. The built-in LED backlight has long service life and supports multi-level brightness stepless adjustment. The resistive or capacitive touch sensing layer has high touch accuracy, fast response speed and strong anti-interference ability, supporting single-point and multi-point touch operations, and can maintain stable touch performance after millions of touches. The front panel has good wear resistance, anti-glare and anti-fouling properties, adapting to the harsh use environment of industrial workshops.
In CAN communication performance, the built-in CAN controller fully conforms to CAN 2.0A and CAN 2.0B protocol specifications, covering multiple common baud rate ranges from low speed to high speed, and communication parameters can be freely configured according to on-site requirements. It supports multi-drop bus networking, allowing multiple CAN bus slave devices to be connected to the same communication bus, with reliable signal polling and data interaction capabilities. The communication response is fast with small transmission delay, ensuring the real-time performance of control instructions and data feedback. The signal driving capability is strong, meeting the long-distance transmission requirements of CAN bus in large workshops and production lines. The manually controllable terminating resistor can optimize signal quality under different bus layout conditions.
In mechanical performance, the whole machine adopts compact integrated structure with reasonable overall size and moderate weight, which does not occupy extra installation space and is suitable for installation in standard industrial control cabinets and operation consoles. The shell materials and internal electronic components are firmly assembled and welded, with good vibration resistance and impact resistance, and no poor contact or component loosening will occur under long-term mechanical vibration conditions on industrial sites. The installation structure and fixing parts are firm and durable, supporting repeated disassembly and installation. The front panel and interface parts have good sealing performance, effectively blocking dust and moisture.
In environmental adaptability, the rated working ambient temperature of the device ranges from 0°C to +55°C, and the storage temperature ranges from -20°C to +60°C. The applicable relative humidity is 5% to 95% non-condensing during operation and storage, and it can resist mild dust, humidity and chemical gas erosion in industrial workshops. The whole product has passed professional vibration, impact and aging tests, and can operate stably for a long time in continuous vibration and harsh climate environments. All materials comply with flame retardant and environmental protection standards, meeting the safety and environmental protection requirements of industrial sites. The device adopts passive heat dissipation combined with optimized air duct design, without fans and other moving parts, reducing failure points and improving long-term operation reliability.
General Matching Accessories
The main supporting accessories for the 5AC600.CANI-00 integrated touch screen and CAN interface module include dedicated CAN bus shielded communication cables, power connection wires, DSUB terminal adapters, installation brackets, sealing gaskets, interface protection covers and fixing screws. All dedicated CAN communication cables adopt multi-layer shielding structure, with excellent oil resistance, wear resistance, bending resistance and anti-interference performance, which can stably transmit CAN differential signals for a long distance and reduce external electromagnetic interference. The power connection wires are made of high-quality flame-retardant wires, with safe and reliable electrical conductivity, adapting to industrial power supply environments. The terminal adapters facilitate standardized on-site wiring, signal branching and circuit expansion, making the wiring layout neat and orderly. The installation brackets and gaskets are used for embedded and wall-mounted installation of the equipment, improving installation firmness and sealing performance. The interface protection covers can protect the 9-pin DSUB CAN interface and unused terminals from dust, moisture and mechanical damage, extending the service life of the interface.
Maintenance spare parts include replacement touch screen protective film, protective fuses, signal terminals and dedicated debugging cables. The protective film can protect the touch surface from scratches and wear and can be replaced regularly. Fuses and protection components can be quickly replaced after electrical faults to protect the internal main circuit of the equipment. Debugging cables are used for daily touch screen program downloading, CAN bus parameter setting, signal testing and fault troubleshooting. It is recommended to select original B&R supporting accessories to ensure complete compatibility, stable connection and consistent overall performance of the system.
For daily maintenance, regularly wipe the equipment surface and interfaces with a dry soft cloth to remove dust and stains, check whether the installation position is loose, cables are aged or damaged, and avoid contact with strong corrosive substances and sharp objects. It is advised to reserve the same model of integrated touch screen modules and vulnerable accessories as on-site spare parts, so as to realize rapid replacement after equipment failure and reduce production interruption time. All supporting accessories are manufactured in accordance with B&R unified industrial standards and have good interchangeability.
Applicable Equipment and Fields
The 5AC600.CANI-00 integrated touch screen and CAN interface module is a dedicated man-machine interaction and communication device for B&R 5AC600 series industrial automation systems. It is mainly matched with B&R APC620, APC800, PPC700 series automation PCs, industrial controllers and control cabinets, and can be connected with various CAN bus devices such as PLCs, servo drives, frequency converters, remote I/O modules, industrial sensors and actuators. It is applicable to all industrial automation scenarios that require simultaneous realization of on-site touch operation, real-time status monitoring and CAN bus multi-device networking communication.
Typical applicable equipment includes automated assembly lines, CNC machine tools, intelligent packaging machinery, textile production equipment, food processing machinery, industrial robots, intelligent logistics conveying equipment, on-site bus control cabinets and automatic test benches. Installed on the operation panel or inside the control cabinet of the equipment, it undertakes core tasks such as equipment operation control, production data display, running status monitoring, fault alarm and CAN bus data interaction, ensuring the orderly execution of production processes and equipment actions. It is also widely used in industrial central monitoring systems, workshop centralized control platforms and environmental monitoring equipment, supporting decentralized equipment operation and centralized system management.
In terms of application fields, this product covers machinery manufacturing, light industry, food and beverage, textile and garment, logistics and warehousing, pharmaceutical, new energy and many other industries. It can adapt to complex working conditions such as long-time continuous operation, frequent touch operation and high-frequency data interaction, as well as harsh environments with strong electromagnetic interference and mechanical vibration. It is suitable for supporting assembly of new automated equipment and technical transformation and function upgrading of old industrial equipment. With compact integrated design, clear display, sensitive touch, stable CAN communication, strong anti-interference capability and convenient installation and maintenance, it has become an ideal integrated solution for man-machine interaction and bus communication in various medium and small-scale industrial automation equipment.
Certification and Quality Description
The 5AC600.CANI-00 integrated touch screen and CAN interface module is manufactured in strict accordance with the ISO 9001 international quality management system and European industrial electronic product production standards. All raw materials such as display screens, touch sensors, CAN controller chips, circuit boards, connectors and shell materials are supplied by certified high-quality suppliers. The whole production process implements multi-process strict quality control, including incoming material inspection, component welding inspection, circuit debugging, touch accuracy calibration, communication protocol testing and finished product 72-hour continuous aging test, to ensure that each product meets standard performance requirements before leaving the factory.
This product has obtained CE certification and complies with EU electromagnetic compatibility directives and RoHS environmental protection directives, meeting environmental protection and safe use requirements in various regions around the world. Adopting mature industrial touch technology and CAN bus communication technology combined with precise SMT manufacturing process, the product features low failure rate, stable long-term operation and long service life under rated working conditions. The original manufacturer provides comprehensive global after-sales technical services, including product model consultation, installation guidance, touch screen program configuration, CAN bus parameter debugging, fault diagnosis and regular maintenance support. After long-term application and verification in a large number of industrial scenarios worldwide, this series of integrated touch screen modules have been widely recognized by users for their stable display, sensitive touch, reliable communication, compact structure and easy maintenance.
Ordering and Delivery Instructions
The complete ordering model number is 5AC600.CANI-00. Customers must confirm the full model number when placing orders to ensure accurate product delivery. All delivered products are brand-new original genuine products, with a standard 12-month manufacturer warranty starting from the date of goods receipt.
The standard delivery package only contains the integrated touch screen and CAN interface device body. Dedicated communication cables, power wires, installation brackets, wiring terminals and other matching accessories are not included in the package and need to be ordered separately according to actual application requirements. The delivery cycle of supporting accessories is consistent with that of the main product. All products are equipped with complete delivery documents, product certificates and traceable logistics information, and a variety of logistics methods are optional to ensure that the products are transported to the destination safely and intactly.
Before placing an order, customers are recommended to confirm the product model, installation method, matched host equipment model, CAN bus networking requirements and the list of required supporting accessories through official authorized distributors or professional technical personnel, so as to avoid model mismatch and specification errors and reduce unnecessary losses.
Get a Quote