5AC600.CANI-00 CAN Interface Module Product Description
The 5AC600.CANI-00 is an add-on CAN communication interface module developed by B&R, belonging to the 5AC600 series of dedicated expansion accessories for industrial automation PCs. Designed as a plug-in board type component, it is specially developed to expand CAN bus communication capability for B&R APC620, APC810, APC800 and PPC700 series automation PCs and panel PCs. Adopting industrial-grade Intel 82527 CAN controller chip and mature bus communication technology, this module fully complies with CAN 2.0A and CAN 2.0B protocol standards, and supports stable data transmission and multi-node networking. Manufactured in strict accordance with B&R original industrial production specifications and international electrical safety and electromagnetic compatibility standards, each module undergoes rigorous aging test, high and low temperature cycle test, vibration test and surge protection test during the production process. With compact structure, reliable circuit design and excellent anti-interference performance, it can operate stably for a long time in harsh industrial environments with complex electromagnetic interference, mechanical vibration, dust and humidity. It is widely applied in industrial automation production lines, motion control systems, intelligent machinery, on-site bus control networks and industrial monitoring systems, meeting the CAN bus communication and data interaction requirements of various industrial automation scenarios.
Description
5AC600.CANI-00 CAN Interface Module Product Description
Product Overview
The 5AC600.CANI-00 is an add-on CAN communication interface module developed by B&R, belonging to the 5AC600 series of dedicated expansion accessories for industrial automation PCs. Designed as a plug-in board type component, it is specially developed to expand CAN bus communication capability for B&R APC620, APC810, APC800 and PPC700 series automation PCs and panel PCs. Adopting industrial-grade Intel 82527 CAN controller chip and mature bus communication technology, this module fully complies with CAN 2.0A and CAN 2.0B protocol standards, and supports stable data transmission and multi-node networking. Manufactured in strict accordance with B&R original industrial production specifications and international electrical safety and electromagnetic compatibility standards, each module undergoes rigorous aging test, high and low temperature cycle test, vibration test and surge protection test during the production process. With compact structure, reliable circuit design and excellent anti-interference performance, it can operate stably for a long time in harsh industrial environments with complex electromagnetic interference, mechanical vibration, dust and humidity. It is widely applied in industrial automation production lines, motion control systems, intelligent machinery, on-site bus control networks and industrial monitoring systems, meeting the CAN bus communication and data interaction requirements of various industrial automation scenarios.
Basic Information
The complete model number of the product is 5AC600.CANI-00, which is a single-board plug-in expansion module with integrated circuit structure and lightweight design. The main body adopts high-strength PCB substrate with insulating protective coating, and features edge connector design for fast plugging and matching with the reserved expansion slot of the host automation PC, realizing quick installation, disassembly and replacement. The internal circuit adopts optimized layout, equipped with dedicated Intel 82527 CAN controller, signal processing circuit, ESD protection components and voltage protection units, effectively reducing internal signal crosstalk and resisting external electrical interference.
This module adopts bus power supply from the matched automation PC without independent power interface, which simplifies on-site wiring work. It is configured with one standard 9-pin male DSUB CAN communication interface, and a sliding switch for activating and deactivating the built-in CAN bus terminating resistor, with the terminating resistor set to disabled by default upon factory delivery. The module supports embedded slot installation inside standard industrial control cabinets and equipment racks, with unified installation dimensions and standard connector specifications, featuring accurate positioning, firm electrical connection and convenient operation. Each finished product passes comprehensive factory tests including power-on test, communication accuracy test, insulation withstand voltage test and protocol compatibility test before leaving the factory. The standard package only contains the CAN interface module body. Special connecting cables, terminal adapters, installation accessories and other matching parts need to be purchased separately according to actual application needs. Clear model number, production batch and serial number are printed on the module surface, facilitating product identification, quality traceability and on-site inventory management. The whole product follows unified modular design standards and has good interchangeability with other modules of the same series.
Function and Positioning
Positioned as a dedicated CAN bus communication expansion interface module for B&R automation PCs, the 5AC600.CANI-00 acts as a core data transmission bridge between the host automation PC and on-site CAN bus devices. Its core function is to expand the CAN communication channel of the host equipment, realize two-way transmission of control instructions, operating status data, production parameters and fault information, and support CAN bus multi-device networking and distributed communication. It is widely used for communication connection between automation PCs, PLCs, servo drives, frequency converters, remote I/O modules, sensors and upper monitoring terminals, effectively expanding the communication scale and application scope of industrial control systems.
In terms of communication processing, the built-in Intel 82527 CAN controller fully complies with CAN 2.0A and CAN 2.0B international protocol standards, and supports non-maskable interrupt (NMI) triggering to ensure timely response of communication signals. The module supports multiple adjustable communication baud rates and flexible configuration of communication parameters, adapting to different rate requirements of various CAN bus devices on industrial sites. The integrated ESD and overvoltage protection circuits provide all-round electrical protection for communication signals, effectively isolating external surge voltage, static electricity and electromagnetic interference, protecting the host equipment and the entire CAN bus network from electrical damage, and greatly improving the stability and safety of long-distance signal transmission.
In terms of system networking and expansion, this module provides an independent CAN bus channel, and multiple modules can be used in combination with different expansion slots of the host automation PC to expand multi-channel CAN communication interfaces, meeting the networking requirements of large-scale multi-device systems. It supports multi-node device access on the same CAN bus, simplifies on-site wiring and optimizes the overall structure of the control system. The reserved sliding switch for the terminating resistor allows users to manually enable or disable the resistor according to the actual length of the CAN bus cable and the number of connected nodes, effectively eliminating signal reflection and ensuring signal integrity during transmission. In terms of operation protection, the module has built-in overcurrent, short circuit and reverse voltage protection logic. When abnormal circuit conditions occur, it will automatically trigger protection actions to avoid module burnout and ensure continuous and stable operation of the whole system.
In terms of operation and maintenance, the module is equipped with status indicator lamps, which can intuitively feedback power-on status, data sending and receiving status and fault status, helping maintenance personnel quickly judge the working condition. It supports online communication parameter debugging and real-time communication status monitoring, and can cooperate with upper configuration software to complete fault diagnosis and troubleshooting, simplifying daily maintenance work and reducing equipment downtime. This product is suitable for communication function expansion of new automation equipment and CAN bus transformation and upgrading of old industrial equipment, with strong versatility and good compatibility with B&R full series of automation PC products.
Core Performance Parameters
In electrical performance, the module adopts bus power supply from the matched automation PC, featuring low power consumption design and stable power adaptation capability. The internal circuit has high insulation strength and high withstand voltage level, complying with international industrial electrical safety standards, and can effectively isolate electrical signals between the host side and the field bus side. The built-in multi-level protection circuits such as overvoltage, overcurrent, ESD and reverse connection provide comprehensive electrical protection for the module and connected equipment. The communication circuit has low signal distortion and high transmission accuracy, with extremely low data error rate and packet loss rate during long-distance transmission. The whole machine has excellent electromagnetic compatibility, and can work normally under complex electromagnetic interference environments such as inverters and high-power motors.
In communication performance, the module fully conforms to CAN 2.0A and CAN 2.0B protocol specifications, and supports standard CAN bus communication modes. It covers multiple common baud rate ranges from low speed to high speed, and users can freely configure communication parameters such as baud rate, data format and filter according to actual working conditions. It supports multi-drop bus communication, allowing multiple CAN slave devices to be connected to the same bus, with reliable signal polling and data interaction capabilities. The communication response speed is fast with small transmission delay, ensuring the real-time performance of control instructions and data feedback. The signal driving capability is strong, which can meet the long-distance transmission requirements of CAN bus in large workshops and production lines. The configurable built-in terminating resistor can effectively optimize signal transmission quality under different bus layout conditions.
In mechanical performance, the module adopts a compact single-board structure with small overall size and light weight, which does not occupy extra installation space and is suitable for installation in narrow expansion slots of automation PCs. The PCB substrate and electronic components are firmly welded and fixed, and no poor contact or component loosening will occur due to long-term mechanical vibration on industrial sites. The edge connector and 9-pin DSUB interface adopt wear-resistant and anti-loosening design, ensuring stable plugging performance and reliable electrical connection after repeated plugging and long-term operation. The overall structure has good vibration resistance and impact resistance, adapting to the mechanical environment of automated production lines.
In environmental adaptability, the rated working ambient temperature of the module ranges from 0°C to +55°C, and the storage temperature ranges from -20°C to +60°C. The applicable relative humidity is 5% to 95% non-condensing during operation and storage, and it can resist mild dust and humidity erosion in industrial workshops. The whole product has passed professional vibration and impact tests, and can operate stably for a long time in continuous vibration environments. The surface coating and internal components have good dust-proof and moisture-proof properties. All materials comply with flame retardant and environmental protection standards, meeting the environmental protection and safety requirements of industrial sites. The module adopts passive cooling mode without fans and other moving parts, which reduces failure points and improves long-term operation reliability.
General Matching Accessories
The main supporting accessories for the 5AC600.CANI-00 CAN interface module include dedicated CAN bus shielded communication cables, signal extension cables, DSUB terminal adapters, interface protection covers and fixing accessories. All dedicated communication cables adopt multi-layer shielding structure, with excellent oil resistance, wear resistance, bending resistance and anti-interference performance, which can stably transmit CAN bus differential signals for a long distance and reduce external electromagnetic interference. The terminal adapters facilitate standardized on-site wiring, signal branching and circuit expansion, making wiring work neat and orderly. The interface protection covers can protect the 9-pin DSUB connector and unused signal terminals from dust, moisture and mechanical damage, effectively extending the service life of the module interface.
Maintenance spare parts include replacement signal terminals, protective fuses and dedicated debugging cables. Fuses and protection components are used for rapid replacement after electrical faults to protect the main circuit of the module. Debugging cables are applied for daily CAN bus parameter setting, signal testing and fault troubleshooting. It is recommended to select original B&R supporting accessories to ensure complete compatibility, stable connection and consistent overall performance of the system. For daily maintenance, regularly clean the module surface and connectors with dry soft cloth, check whether the plugging position is loose and cables are aged, and avoid contact with strong corrosive substances and sharp metal objects. It is advised to reserve the same model of CAN interface modules and vulnerable accessories as on-site spare parts to realize rapid replacement after failure and reduce production interruption time. All supporting accessories are manufactured in accordance with unified B&R industrial standards with good interchangeability.
Applicable Equipment and Fields
The 5AC600.CANI-00 CAN interface module is a dedicated communication expansion component for B&R 5AC600 series automation PC systems, and is mainly used in conjunction with B&R APC620, APC810, APC800, PPC700 and other series of automation PCs and panel PCs. It can be matched with various CAN bus devices such as PLCs, servo drives, frequency converters, remote I/O modules, industrial sensors and actuators, and is applicable to all industrial automation scenarios that require CAN bus communication, long-distance data transmission and multi-device networking.
Typical applicable equipment includes automated assembly lines, numerical control machine tools, intelligent packaging machinery, textile production equipment, food processing machinery, industrial robots, intelligent logistics conveying equipment and on-site bus control cabinets. Installed in the expansion slot of the automation PC, it undertakes core tasks such as data transmission, instruction interaction and signal isolation between the host and field CAN bus devices, ensuring the orderly execution of equipment actions and production processes. It is also widely used in industrial central monitoring systems, automatic test benches and environmental control equipment, supporting decentralized device communication and centralized system management.
In terms of application fields, this product covers machinery manufacturing, light industry, food and beverage, textile and garment, logistics and warehousing, pharmaceutical, new energy and other industries. It can adapt to working conditions such as long-time continuous operation, frequent data interaction and complex electromagnetic and mechanical environments. It is suitable for supporting assembly of new automated equipment and technical transformation and CAN bus system upgrading of old industrial equipment. With compact structure, stable communication performance, strong anti-interference capability and convenient installation and maintenance, it has become a reliable CAN bus communication expansion solution for various industrial automation PCs and control systems.
Certification and Quality Description
The 5AC600.CANI-00 CAN interface module is manufactured in strict accordance with the ISO 9001 international quality management system and European industrial electronic product production standards. All raw materials such as CAN controller chips, circuit boards, connector materials and insulating materials are supplied by certified high-quality suppliers. The whole production process implements multi-process strict quality control, including incoming material inspection, component welding inspection, circuit debugging, communication protocol calibration and finished product 72-hour continuous aging test, to ensure that each module meets standard performance requirements before leaving the factory.
This product has obtained CE certification and UL 508 certification, and complies with EU electromagnetic compatibility directives and RoHS environmental protection directives, meeting environmental protection and safe use requirements in various regions around the world. Adopting mature CAN bus communication technology and precise SMT manufacturing process, the product features low failure rate, stable long-term operation and long service life under rated working conditions. The original manufacturer provides comprehensive global after-sales technical services, including product model consultation, installation guidance, CAN bus parameter debugging, fault diagnosis and regular maintenance support. After long-term application and verification in a large number of industrial scenarios worldwide, this series of CAN interface modules have been widely recognized by users for their stable transmission, strong anti-interference, compact design and easy maintenance.
Ordering and Delivery Instructions
The complete ordering model number is 5AC600.CANI-00. Customers must confirm the full model number when placing orders to ensure accurate product delivery. All delivered products are brand-new original genuine products, with a standard 12-month manufacturer warranty starting from the date of goods receipt.
The standard delivery package only contains the CAN interface module body. Dedicated CAN communication cables, wiring terminals, installation accessories and other matching parts are not included in the package and need to be ordered separately according to actual application requirements. The delivery cycle of supporting accessories is consistent with that of the main product. All products are equipped with complete delivery documents and traceable logistics information, and a variety of logistics methods are optional to ensure that the products are transported to the destination safely and intactly.
Before placing an order, customers are recommended to confirm the product model, slot type of matched automation PC, CAN bus interface configuration and the list of required supporting accessories through official authorized distributors or professional technical personnel, so as to avoid model mismatch and specification errors and reduce unnecessary losses.
Get a Quote