Honeywell 51199929-100（SPS5710 / CC-PWRR01）
Description
Model Explanation
51199929: Base part number (SPS5710 series)
‑100: 100W power rating, standard version
SPS5710: Honeywell internal model (System Power Supply)
CC-PWRR01: Experion PKS Series C redundant power supply designation
Rev A/B: Hardware revisions (drop‑in compatible)
Technical Parameters
Device Type: AC/DC power supply, redundant capable
Compatibility: Honeywell Experion PKS C300, TDC3000/TPS UCN
Input Voltage: 85–264 VAC, 50/60 Hz; 125/250 VDC
Output Voltage: 24 VDC (±1%)
Output Power: 100W max
Output Current: 4.2A @24VDC
Efficiency: ≥90%
Protection: Overvoltage, overcurrent, short‑circuit, overtemperature
Operating Temp: ‑40 °C to +70 °C
Dimensions (W×H×D): 120 mm × 70 mm × 30 mm
Weight: ≈0.2 kg
Certifications: CE, UL, CSA
Interface & Communication Configuration
AC Input: IEC C13 connector
DC Output: 2‑pin terminal block (24VDC, 4.2A)
Status LEDs: Power (OK), Fault (red), DC Output
Redundancy: Active‑active, 1:1 parallel, seamless failover
Alarm Contact: Dry contact for fault monitoring
Core Functions
Regulated 24VDC: Stable power for C300 controllers and Series C I/O
Wide‑Range Input: Global AC/DC compatibility for industrial sites
Redundant Operation: 1:1 configuration eliminates single point of failure
High Efficiency: Reduces heat and energy consumption
Comprehensive Protection: Safeguards loads from electrical faults
Application Scope
Honeywell Experion PKS C300 controller cabinets
TDC3000/TPS UCN system I/O and controller racks
Process industries: oil & gas, refining, chemical, power, pharmaceuticals
Critical control rooms requiring 24/7 uptime
Direct replacement for SPS5710 / CC-PWRR01
Operation & Maintenance Instructions
Mount in a clean, ventilated cabinet (ambient <70°C)
Connect IEC C13 to AC mains; DC output to system backplane
For redundancy, install two units in parallel (active‑active)
Verify “Power” LED on; “Fault” LED off during normal operation
Use only Honeywell‑certified replacements for compatibility and safety
Get a Quote