Model Explanation

• 51197564: Base part number for UCN fiber optic extender

• ‑200: 24 VDC power version (MU-FOED02, 2 km)

• MU-FOED02: Official model (Fiber Optic Extender Assembly, DC-powered)

Technical Parameters

• Device Type: UCN fiber optic extender (electrical‑to‑optical converter)

• Compatibility: Honeywell TDC3000 / TPS (UCN network nodes)

• Power Input: 24 VDC (18–36 VDC range)

• Transmission Media: Multimode fiber (MMF, 62.5/125 μm)

• Max Distance: 2 km (1.24 miles)

• Data Rate: UCN standard (1 Mbps)

• Wavelength: 850 nm (LED transmitter)

• Operating Temp: 0 °C to +55 °C

• Humidity: 5%–90%, non‑condensing

• Dimensions (W×H×D): ≈220 mm × 120 mm × 50 mm

• Weight: Approx. 1.5 kg

• Certifications: CE, UL, CSA

• MTBF: > 80,000 hours

Interface & Communication Configuration

• UCN Port: RJ‑45 (electrical UCN, 1 Mbps)

• Fiber Port: ST duplex (multimode fiber)

• Power: Terminal block (24 VDC input)

• Status LEDs: Power, Link, Tx, Rx, Fault

• Switch Settings: Termination, fiber mode, station address

Core Functions

• Signal Conversion: Converts electrical UCN signals to optical for long‑distance transmission

• Noise Immunity: Eliminates EMI/RFI interference in industrial environments

• Distance Extension: Extends UCN reach from 500 m (copper) to 2 km (fiber)

• Network Isolation: Provides electrical isolation between UCN segments

• DC Power Flexibility: Operates on 24 VDC, suitable for industrial cabinets

Application Scope

• Honeywell TDC3000/TPS DCS (UCN network extension)

• Process industries: power, oil & gas, refining, chemical, petrochemical

• Control rooms and remote field units separated by >500 m

• Areas with high electrical noise (motors, VFDs, heavy machinery)

• Cabinets with 24 VDC power infrastructure (vs. 120 VAC)

Operation & Maintenance Instructions

• Mount in clean, ventilated area near UCN node or cabinet

• Connect RJ‑45 to UCN device; connect ST fiber to remote extender

• Apply 24 VDC power; verify “Power” and “Link” LEDs are lit

• Check “Tx/Rx” LEDs flash during data transfer; “Fault” LED off

• Keep ambient temp < 55 °C; avoid direct sunlight and moisture

• Replace only with Honeywell‑certified 51197564‑200 extenders