Model Explanation

• 51197006: Base part number for TDC3000 display controller PCB

• ‑100: Standard revision (compatible with monochrome/color CRT and LCD monitors)

Technical Parameters

• Device Type: Display/video controller card

• Compatibility: Honeywell TDC3000 / TPS (GUS/US operator stations)

• Video Output: Analog RGB (CRT) / digital LVDS (LCD)

• Resolution: Up to 1280×1024 (CRT) / 1024×768 (LCD)

• Refresh Rate: 60 Hz (standard)

• Power: 5 VDC / 12 VDC from workstation backplane

• Operating Temp: 0 °C to +55 °C

• Humidity: 5%–90%, non‑condensing

• Dimensions (W×H×D): Standard TDC3000 card (≈220 mm × 120 mm)

• Weight: Approx. 0.6 kg

• Certifications: CE, UL, CSA

• MTBF: > 75,000 hours

Interface & Communication Configuration

• Video Port: D‑Sub 15 (CRT) / 20‑pin LVDS (LCD)

• CPU Link: Parallel/serial bus to GUS/US main board

• Status LEDs: Power, Run, Video, Fault (card edge)

• Backplane: TDC3000 standard card slot (power + data)

Core Functions

• Video Signal Generation: Converts system graphics data to display signals

• Display Mode Switching: Supports both CRT and LCD monitors

• On‑board Diagnostics: Monitors video output and link health

• Resolution/Refresh Control: Configures display parameters via system software

• HMI Rendering: Accelerates graphics for operator interface pages

Application Scope

• Honeywell TDC3000/TPS DCS (GUS/US operator workstations)

• Process industries: power, oil & gas, refining, chemical, petrochemical

• Control rooms using CRT or LCD displays for process monitoring

• Replacement/upgrade of legacy TDC3000 display controller boards

Operation & Maintenance Instructions

• Install in spare slot of GUS/US workstation card cage

• Connect video cable to monitor and backplane power before power‑on

• Verify “Video” LED is on; adjust display settings via GUS utility

• Keep ambient temp < 55 °C; avoid dust and moisture

• Replace only with Honeywell‑certified 51197006-100 boards